Everything 1.2.1.426：Failed to get overlapped result

[zhaohs]

Hi David,

I've downloaded the latest alpha version of Everything, i.e., the following one:

http://www.voidtools.com/Everything-1.2.1.426a.zip

When I use it, I found the following error in the Errorlog.txt:

------------------
db::_monitor_thread_proc(): GetOverlappedResult(): 87: Failed to get overlapped result for drive C:
------------------

Dose it harm? Why does this happen? Any hints will be highly appreciated.

Thanks in advance.

Hongsheng Zhao.

[David]

How many errors, is it just the one error?
Is there anything that might have happened to the monitoring state?
For example, suspending the computer, or plugging in / removing a drive?

[zhaohs]

How many errors, is it just the one error?
Is there anything that might have happened to the monitoring state?
For example, suspending the computer, or plugging in / removing a drive?

1- Till now, I've only seen this only one error.

2- Nothing happened to monitoring state. I just use my computer as usual, i.e., starting/rebooting it normally, no flash drive being plugged in / removed off and so on.

Additionally, I noticed the following strange things:

I use CodeStuff Starter as my startup manager. When I set Everything 1.2.1.426 to start on system startup, the corresponding entry will be added to the CodeStuff Starter as follows:

--------------------------
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run]
"Everything"="\"path\\to\\Everything-1.2.1.426a.exe\" -startup"
-------------------------

In this case, the error I've reported here will appear.

if I change the above startup entry to the following one, the error I've reported here will dissappear:

-------------------------
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run]
"Everything"="\"path\\to\\Everything-1.2.1.426a.exe\" -startup"
-------------------------

Best regards.

[David]

It is nothing to worry about.

I may need to make the monitoring states a little more error prone.


You mentioned

"Everything"="\"path\\to\\Everything-1.2.1.426a.exe\" -startup"

twice.
I assume the path has changed?

Thanks for your support.

[zhaohs]

It is nothing to worry about.

I may need to make the monitoring states a little more error prone.


You mentioned

"Everything"="\"path\\to\\Everything-1.2.1.426a.exe\" -startup"

twice.
I assume the path has changed?

Thanks for your support.

In both cases, the Everything-1.2.1.426a.exe is put into the same directory.

Best regards.
Hongsheng Zhao.

[David]

I have re-written USN Journal monitoring.

It should fix this problem.

To try it, please replace your Everything.exe with:
http://www.voidtools.com/Everything-1.2.1.432a.zip